Lượt xem: 927
Giá: Liên hệ
Mã sản phẩm: 300
features
Operations
To weld a wire to a steel body, the magnet is used to make a return contact.
The thermocouple wire is stripped back and the pliers are used to grip this wire about 25mm from the cut end.
The ‘charge’ button is pushed and released. After a short time the LEDS change from ‘charging’ to ‘ready’.
The thermocouple wire is held firmly against the steel surface and the ‘weld’ button is pushed. This welds the wire to the steel body(Auto Mode: Weld is made automatically 1.5 seconds after contact).
The energy setting knob is used to set the required energy for different wire diameters.
Discharge energy 18 to 40 Joules Output
Supply voltage 100 - 130 VAC
Dimensions (mm) 220 x 90 x 220
Battery re-charge time 6 - 8 hours